Five points for attention in cathodic protection construction

1. After the cathodic protection system is used, the completed system should be adjusted according to a series of electrode values, that is, the feedback value of the electrode, so that the whole system can reach the most perfect degree. The edge comparison system can have the best protection state.


2. The cathodic protection system must be debugged after installation, and the correctness of the circuit should be checked before debugging. There should be no short circuit or open circuit, otherwise there will be unexpected consequences. It is better to make the debugging complete at one time.


3. Pay attention to the detailed inspection of all electrodes of cathodic protection before construction. This inspection includes the appearance, if the electrode is kept clean and there is no damage, there is also the inspection of connection and resistance. Ensure insulation.


4. Under sufficient conditions, an anode screen should be made around the anode. The whole cathodic protection system can have uniform current.


5. In the process of construction, it should be made in strict accordance with the construction drawings, especially the auxiliary anode and reference electrode must be well connected and marked.


Shandong Linyi Bosi conductive materials Co., Ltd. is a high-tech enterprise specializing in the production of MMO flexible anode, conductive polymer flexible anode and titanium coated anode, mainly providing cathodic protection technology, engineering design, installation and technical services.