What are the basic requirements of the coating for the anti-corrosion coating inside the tank bottom?

We generally require that the storage products are not deteriorated, resistant to moisture and penetration, have a good adhesion to the metal surface, impact resistance, anti cathode stripping, easy repair, good aging resistance and storage temperature resistance.

Due to the friction between the oil and the pipe wall during transportation, static electricity will be generated when it flows through the pump and filter. At the end of the pipeline, the static electricity that has not been dissipated enters the oil tank. In the oil tank, the relative movement between the oil product and the friction oil on the inner wall of the oil tank connecting pipe will also generate static electricity.

If the ordinary insulation coating is used, its resistivity is usually between 109 and 1013 ohm, which may cause electric shock through the oil and gas reservoir and cause accidents if the electrostatic high voltage generated during the storage and transportation of crude oil is blocked.

Therefore, it is required to use antistatic coatings with resistivity below 108 ohm.

Shandong Linyi Bosi conductive materials Co., Ltd. is a high-tech enterprise specializing in the production of MMO flexible anode, conductive polymer flexible anode and titanium coated anode, mainly providing cathodic protection technology, engineering design, installation and technical services.